Activation of high flux test module sample holder after IFMIF-DONES operation

  • S. Breidokaitė
  • G. Stankūnas
  • A. Tidikas
Keywords: IFMIF-DONES, fusion, neutron irradiation, MCNP, FISPACT

Abstract

Nuclear safety assessment in nuclear fusion devices relies on the Monte Carlo method based neutron transport calculations. This paper presents information about the calculation results of the activities and dose rates caused by neuron irradiation for the structural materials of the high flux test module sample holder of IFMIF-DONES. The neutron induced activities and dose rates at shutdown were calculated by means of the FISPACT-2010 code with data from the EAF-2010 nuclear data library. Neutron fluxes and spectra were obtained with MCNP neutron transport calculations. The activities and dose rates were calculated at the end of irradiation of the assumed device operation scenario for cooling times of 0 s – 1000 year. In addition, radionuclides with contribution of at least 0.5% to the total value of activation characteristics at the previously mentioned cooling times were identified. After the operation, the most active radionuclide is 55Fe, with an activity share ranging from 30% (M200) to 63% (M8), and at the end of the prediction it accounts for 86% of the total activity. The highest dose rates at the end of irradiation are attributed to 56Mn radionuclide. 54Mn and 60Co are the most dominant radionuclides during intermediate and long cool-down periods.
Published
2020-02-05
Section
Mathematical and Computational Physics